The MWM 6.12 TCA,part of the12 engine family, is a compact and durable inline 6-cylinder diesel engine designed for marine propulsion, auxiliary marine systems, and industrial power generation. With a displacement of approximately 7.2 liters, the engine delivers power outputs typically ranging from 150 to 200 kW, depending on its configuration and speed (1,500 or 1,800 RPM). The engine features turbocharging and charge-air cooling (TCA), which ensures high power density and fuel efficiency, even under continuous load conditions. The 6.12 TCA is widely used in workboats, tugboats, and small vessels, where reliability and ease of maintenance are critical. It generally complies with Tier 0 or IMO Tier I emission standards, as it predates modern Tier 2 and Tier 3 regulations. 

 ENGINE SPECIFICATIONS

POWER  MAXIMUM TORQUE Certification  

150-200 KW 897 Nm @ 1800 RPM Tier 0 or IMO Tier I                                 

NEW GENUINE / REMAN

The MWM 229‑4T engine is a robust and efficient 4-cylinder, 4-stroke turbocharged diesel engine designed for a wide range of industrial, agricultural, and stationary power applications.With a displacement of approximately 3.92 liters, the 229‑4T typically delivers power in the range of 70 to 90 kW, depending on the specific configuration and speed. Its turbocharging boosts power density and fuel efficiency, making it a solid choice for generator sets, water pumps, tractors, and construction equipment operating in challenging environments. The engine features a mechanical fuel system and a proven, simple design that supports easy maintenance and high reliability in remote or off-grid locations. 

ENGINE SPECIFICATIONS

POWER  MAXIMUM TORQUE  Certification  

70-90 KW  395 Nm @ 1500RPM   Tier I                                  

NEW GENUINE / REMAN

The MWM 229‑4 NA is a naturally aspirated,4-cylinder diesel engine from the durable 229 series, designed for light to medium-duty industrial and agricultural use. With a displacement of approximately 4.1 liters, it delivers a power output in the range of 50 to 65 kW and a torque output of around 250 to 320 Nm, depending on application and tuning. This engine is commonly used in agricultural pumps, generators, small construction equipment, and compressors. Its simple, naturally aspirated design and mechanical fuel system make it highly reliable, easy to maintain, and well-suited for harsh environments. The 229‑4 NA engine typically complies with Tier 0 or Tier 1 emission standards, depending on production year and market requirements.

 ENGINE SPECIFICATIONS

POWER  MAXIMUM TORQUE  Certification  

60 KW 250 -320Nm @ 1500RPM  Tier I                                 

NEW GENUINE / REMAN

The MWM D229 Series is a robust and versatile diesel engine designed primarily for industrial applications such as power generation, construction machinery, and agricultural equipment. Known for its durability and reliable performance, the D229 series offers a power range typically between 30 to 150 kW, making it suitable for small to medium-sized equipment and gensets. It complies with Tier 2 and Tier 3 emission standards depending on the variant, ensuring reduced environmental impact while maintaining efficient fuel consumption. 

 ENGINE SPECIFICATIONS

POWER  MAXIMUM TORQUE  Certification  

30-150 KW  282 Nm @ 1500RPM   Tier 2 and Tier 3                                   

NEW GENUINE / REMAN

The MWM D234 Series is a mid-range diesel engine series developed for a variety of industrial applications, including power generation, agricultural machinery, construction equipment, and stationary systems. Available in 4- and 6-cylinder inline configurations, the D234 engines offer power outputs typically ranging from 80 to 180 kW, depending on the variant and application. These engines are known for their rugged design, mechanical fuel systems, and strong torque delivery at low engine speeds, making them well-suited for demanding field conditions.

ENGINE SPECIFICATIONS

POWER   MAXIMUM TORQUE  Certification  

104-510 KW  640 Nm @ 1500RPM  Stage II                                   

NEW GENUINE / REMAN

The MWM D616 Series is a reliable and robust line of inline 6-cylinder diesel engines designed for industrial, construction, power generation, and agricultural applications. Known for their mechanical simplicity and strong torque performance, these engines typically deliver power outputs in the range of 120 to 220 kW, making them well-suited for medium-duty equipment and generator sets. The D616 series features naturally aspirated and turbocharged versions, and is built for durability in challenging environments, offering excellent fuel economy and long service intervals.

 ENGINE SPECIFICATIONS

POWER   MAXIMUM TORQUE   Certification  

120-220 KW  500-900 Nm @ 1500RPM  Stage I                                   

NEW GENUINE / REMAN

The MWM D616 Series is a reliable and robust line of inline 6-cylinder diesel engines designed for industrial, construction, power generation, and agricultural applications. Known for their mechanical simplicity and strong torque performance, these engines typically deliver power outputs in the range of 120 to 220 kW, making them well-suited for medium-duty equipment and generator sets. The D616 series features naturally aspirated and turbocharged versions, and is built for durability in challenging environments, offering excellent fuel economy and long service intervals.

 ENGINE SPECIFICATIONS

POWER   MAXIMUM TORQUE    Certification  

120-220 KW  500-900 Nm @ 1500RPM  Stage I                                   

NEW GENUINE / REMAN

The MWM TCG3020 is a next-generation gas engine designed for high-efficiency industrial power generation and combined heat and power (CHP) applications. Available in V12, V16, and V20 configurations, it delivers electrical outputs ranging from 1,380 kW to 2,300 kW, making it ideal for large-scale industrial plants, utility companies, data centers, and district heating systems. The engine supports multiple gas types including natural gas, biogas, landfill gas, and even hydrogen blends up to 25%, offering exceptional fuel flexibility. It complies with EU Stage IIIA emissions standards (NOₓ ≤ 500 mg/Nm³) and is engineered for high environmental performance. 

 ENGINE SPECIFICATIONS

POWER  MAXIMUM TORQUE  Certification  

1380-2300 KW  181,000 Nm - 305,000 Nm  EU Stage III A                                  

NEW GENUINE / REMAN

The MWM TCG 2032 is a high-capacity gas engine specifically designed for large-scale industrial power generation, independent power producers (IPP), and district energy systems requiring maximum output and long operational life. Available in V12 and V16 configurations, it delivers an electrical output ranging from 3,300 kW to 4,500 kW, making it one of the most powerful models in the MWM lineup. The engine is optimized for operation on natural gas and biogas, offering exceptional fuel efficiency and flexibility. With an electrical efficiency of up to 44.6%, and total efficiency above 87% in CHP mode, the TCG 2032 ensures cost-effective performance over long duty cycles. It complies with EU Stage IIIA emission standards, maintaining NOₓ levels at or below 500 mg/Nm³. 

ENGINE SPECIFICATIONS

POWER  MAXIMUM TORQUE   Certification  

3,333-4300 KW  87,000 Nm - 138,000 Nm  EU Stage III A                                  

NEW GENUINE / REMAN

The MWM AKD 112-1 is a compact and efficient diesel engine that delivers 8 kW (11 HP). This air-cooled, single-cylinder engine features a two-valve configuration, making it ideal for small agricultural and industrial applications. Its robust design includes a single-piece crankcase and a drop-forged crankshaft with screwed-on counterweights, supported by steel-lead-bronze bearings. The crank and shaft pins are heat-hardened for enhanced durability, while the air-cooling system employs cooling fins made of centrifugal cast metal to maintain optimal operating temperatures. Engineered for low fuel and oil consumption, the AKD 112-1 combines reliable performance with cost-effectiveness, making it an excellent choice for those seeking dependable power in a compact package.

MWM AKD 112-1 ENGINE SPECIFICATIONS

Power                                          CYLINDERS                                      VALVES

8 kW /11 HP                                         1  Cylinder                                       2 Valve
           

NEW / REMAN

The MWM D208-4 is a robust diesel engine that delivers 35 kW (48 HP). With its inline 4-cylinder configuration and 8-valve design, this engine is engineered for optimal performance and fuel efficiency in various applications. It excels in industrial and agricultural settings, providing reliable power while maintaining low fuel and oil consumption. The D 208-4’s durable construction ensures longevity, while its efficient cooling system helps maintain optimal operating temperatures. With a compact design that allows for easy installation, the MWM D 208-4 is an ideal choice for those seeking dependable and efficient engine solutions.

MWM D 208-4 ENGINE SPECIFICATIONS

Power                                          CYLINDERS                                      VALVES

35 kW /48 HP                                    4  Cylinders                                         8 Valves
           

NEW / REMAN

The MWM D208-6 is a high-performance diesel engine that produces 68 kW (92 HP). Featuring a robust inline 6-cylinder design with a 12-valve configuration, this engine is optimized for outstanding power and fuel efficiency, making it suitable for a variety of industrial and agricultural applications. Its durable build ensures reliable operation in demanding environments, while its low fuel and oil consumption enhance cost-effectiveness. The advanced cooling system effectively maintains optimal operating temperatures, contributing to the engine's longevity and performance. With a compact design that allows for easy installation, the MWM D 208-6 is an excellent choice for those seeking a dependable and efficient power solution.

MWM D 208-6 ENGINE SPECIFICATIONS

Power                                          CYLINDERS                                      VALVES

68 kW /92 HP                                    6  Cylinders                                         12 Valves
           

NEW / REMAN

The MWM D226-2(Z) engine is a highly efficient and compact power solution featuring a robust design with two cylinders. With a bore diameter of 105 mm and a stroke of 120 mm, it delivers an output of 29.5 kW, making it ideal for various industrial applications. The engine boasts a compression ratio of 18, ensuring effective fuel utilization and enhanced performance. Its advanced engineering guarantee's reliability and low operating costs, while its compact structure facilitates easy installation and maintenance. Overall, the MWM D 226-2 (Z) is a dependable choice for energy generation, delivering optimal productivity in demanding environments

MWM D 226-2 (Z) ENGINE SPECIFICATIONS

Power                                          CYLINDERS                                      VALVES

27 kW /37 HP                                    2  Cylinders                                         4 Valves
           

NEW / REMAN

The MWM D227-3 engine is a powerful and efficient solution designed for various industrial applications, produced before 1978. This water-cooled engine features a robust three-cylinder design with six valves, delivering a reliable output of 43 kW (58 HP). With a bore diameter of 100 mm and a stroke of 120 mm, it is optimized for high performance. The compression ratio of 18 enhances fuel efficiency while ensuring dependable operation. Its compact design facilitates easy installation and maintenance, making the D 227-3 a versatile choice that exemplifies MWM's commitment to high-quality, efficient power solutions tailored to meet diverse operational needs.

MWM D 227-3 ENGINE SPECIFICATIONS

Power                                          CYLINDERS                                      VALVES

43 kW /58 HP                                    3  Cylinders                                         6 Valves
           

NEW / REMAN

The MWM D308-2(Z) air cooled engine is a highly efficient power solution tailored for various industrial applications.With a compact design featuring two cylinders,it delivers a reliable output of 23 kW.Its bore diameter of 95 mm and stroke of 105 mm contribute to its effective performance.The engine is built with a compression ratio of 17.1,optimizing fuel efficiency and enhancing operational reliability.With a total displacement of 1,488 cc, the D 308-2 (Z) combines durability with user-friendly maintenance,making it an ideal choice for energy generation in demanding environments. Overall, this engine ensures consistent power delivery while minimizing operating costs.

MWM D 308-2 (Z)  ENGINE SPECIFICATIONS

Power                                          CYLINDERS                                      VALVES

23 kW /31 HP                                     2  Cylinders                                          4 Valves
           

NEW / REMAN